Jiophone Flash (LYF F61F) File With Tool
How To Flash LYF Jio F61F Flash File And Tool [Unbrick Jio]
Download Jio LYF F61F Flash File and Tool
Jio LYF F61F Stock ROM [Flash File] – DOWNLOAD
Jio LYF F61F Flash Tool – Download
Instructions To Flash Jio LYF F61F Firmware or Official ROM.
- Download Jio LYF F61F stock ROM or Flash file from above download section. [Size 250MB]
- Extract the downloaded Jio LYF F61F flash file on desktop. [Getting any issue to download firmware, please notify us]
- Download Jio LYF F61F firmware flash tool on pc and run “UpgradeDownload.exe” file as administrator.
- Click on Gear Icon [Load Packets] from tool and browse LYF-F61F-01-10-140917.pac file from firmware folder. [Firmware must be in .PAC Format]
- Hit on “START” button to start Jio LYF F61F stock ROM flashing process.
- Next, press & Hold centre Key [OK Button] and attach USB cable at the same time.
[Center key or OK button is the boot key for Jio LYF F61F mobile]
- USB driver installation will be start on pc and will take few minutes to install properly.
- Once the drivers installed, flashing process will start and you will see the complete process bar in tool’s status bar.
- End of the successful flashing, you can see “Success” message on the tool.
- Unplug the device from pc and setup the device again.
- All done!!!
Congratulations, you have successfully installed Jio LYF F61F flash file or ROM on the device.
Here in this flashing guide we used “Upgrade download” tool to flash rom, if you want you can also use “ResearchDownload” tool.
ResearchDownload tool press is same for all mobile, if the firmware contain with .pac file format]
